Installing Ceramic Tile in a Shower

April 10, 2013 robot Uncategorized

Installing ceramic tile in a shower starts with a correct foundation. The foundation consists of WonderBoard or Durock cement board on the walls and a Shower Pan Membrane Liner in the base of the shower, if the shower floor is to be tiled also.

WonderBoard or Durock cement board, also identified as backerboard, are resistant to water and are ideal components for applying ceramic tiles to high-moisture locations. Durock can be applied directly to wall studs and ceiling joists employing hot-dipped galvanized nails or galvanized wood screws.

Thin-set or an adhesive mortar can be applied straight on the WonderBoard or Durock cement board for attaching the ceramic tiles. Nevertheless, fiberglass mesh tape need to be applied more than all seams and smoothed out with a latex thin-set prior to the application of ceramic tiles.

If ceramic tile is preferred on the floor of the shower as well, then a shower pan membrane liner should be installed prior to the installation of the WonderBoard or Durock cement board.

The shower pan membrane liner is utilised to make certain a leak-proof shower. Shower pan membrane liners are used to funnel any water that seeps by way of the floor or wall grout to the shower drain under. The shower pan membrane liner is produced up of a flexible sort of plastic material that sits under a bed of mortar, and the tile, in the shower floor location.

Prior to installing the shower pan membrane liner, the floor of the shower requirements to be pre-sloped to ensure that the water will flow towards the shower drain assembly. The pre-slope is achieved by applying a layer of mortar to the floor of the shower unit region. The layer of mortar is troweled in such as way as to create a gentle slope from the shower wall edges to the center of the shower exactly where the drain resides.

After the pre-slope mortar has cured, the versatile shower pan membrane liner can then be installed. There are a couple of kinds of shower pan membrane liners on the industry, with every single having their own benefits. With either sort of membrane, the homeowner requirements to form and fold the material into the base of the shower area and safe it to the sides of the shower wall frame with staples and/or nails. In addition, an opening in the membrane must be reduce out to allow the adjustable shower drain assembly to slip via.

With the shower pan membrane installed, the cementitious ceramic tile backerboard can then be secured to the framed shower walls. The backerboard is a rigid material that is excellent for attaching tile in wet areas such as a shower stall.

Soon after installing the ceramic tile backerboard, a final coat of mortar demands to be applied on prime of the shower pan membrane to protect it and to supply a strong base for laying the ceramic floor tile.

With the final coat of mortar cured, the ceramic tile can then be installed in the shower.

When the tile and grout have been installed, the shower drain assembly need to be adjusted so that the drain height sits flush with the completed ceramic tile floor.

For a lot more details on installing a shower pan membrane liner, see the Shower Pan Membrane Liner Installation EBook from HomeAdditionPlus.com. The Shower Pan Membrane Liner EBook will speedily teach you the step-by-step process for installing the shower pan membrane liner appropriately. It includes guidelines on framing the shower stall, pouring the pre-slope and shower base mortar, and installing the shower pan membrane liner.

full report check out fiber cement